Technical parameters of manual nursing bed:
　　Standard manual care bed must be used with the various conditions are as follows:
Manual care bed according to the function of the basic technical specifications can be divided into:
　　1, three specifications, specifications manual table set: 2150*1000*520/720mm.
　　2, common specifications specifications manual double table set: 2150*1000*520mm.
　　3, manual general hospital bed specifications are commonly used as: 2020*900*500mm.
Two, manual nursing bed main technical parameter index:
　　1, the shape of the table, double bed and ordinary beds to be neat, the surface shall not have sharp edges and welding should be firm, the weld shall be smooth, uniform;
　　2, the bedstead bending pipe diameter should be smooth spray layer should be smooth, uniform color;
　　3, bed and bedstead after the assembly should be firmly fixed, not loose. The handle can rotate flexibly, when not in use can be folded;
　　4, three table back bed surface can be adjustment range: 80 degrees plus or minus 5 degrees, thigh position adjustment range: 40 degrees plus or minus 5 degrees and the lifting of the whole range: 520 ~ 720; double shaker back a bed surface can be adjustment range: 80 degrees plus or minus 5 degrees, thigh position adjustment range: 40 degrees plus or minus 5 degrees; ordinary beds that fixed height is 500 mm on the left and right.